GE Dishwasher Error Codes
14 codes on file for GE dishwashers. Tap a code for the meaning and ranked fix.
| Code | Meaning | Severity |
|---|---|---|
| 999 | A possible leak was detected or a control reset is needed. On a GE Dishwasher, code 999 points to the leak protection system. | Stops machine |
| C1 | The drain pump-out exceeded two minutes. On a GE Dishwasher, code C1 points to the drain pump. | Degraded |
| C2 | The total pump-out cycle exceeded seven minutes. On a GE Dishwasher, code C2 points to the drain pump. | Degraded |
| C3 | The dishwasher will not drain. On a GE Dishwasher, code C3 points to the drain system. | Stops machine |
| C4 | The unit refilled twice after a power loss, suggesting a stuck or failed float switch. | Degraded |
| C5 | The pump-out time was too short. On a GE Dishwasher, code C5 points to the drain system. | Degraded |
| C6 | The incoming water temperature is too low. On a GE Dishwasher, code C6 points to the water heater. | Degraded |
| C7 | The water-temperature sensor circuit is inoperative. On a GE Dishwasher, code C7 points to the temperature sensor. | Degraded |
| C8 | The detergent cup is blocked from opening fully. On a GE Dishwasher, code C8 points to the detergent dispenser. | Degraded |
| F56 | The dishwasher failed to drain. On a GE Dishwasher, code F56 points to the drain system. | Stops machine |
| FTD | Failure to drain. On a GE Dishwasher, code FTD points to the drain pump. | Stops machine |
| H2O | A low incoming-water condition was detected. On a GE Dishwasher, code H2O points to the water inlet. | Degraded |
| LEAK | Possible leak is detected. On a GE Dishwasher, code LEAK points to the leak sensor. | Stops machine |
| PF | A power failure occurred. On a GE Dishwasher, code PF points to the control board. | Informational |