Washer Not Spinning (Washing Machine)

The machine cannot drain within the expected time. On a Beko Washing Machine, code E03 points to the drain pump.

The door is not locked properly. On a Bosch Washing Machine, code E16 points to the door lock.

The machine cannot drain within the expected time. On a Candy Washing Machine, code E03 points to the drain pump.

The motor speed sensor is not reading drum speed correctly. On a Candy Washing Machine, code E08 points to the tachogenerator.

Water is not pumping out fast enough. On a Frigidaire Washing Machine, code E21 points to the drain pump.

The machine is not draining within the expected time. On a Hoover Washing Machine, code E03 points to the drain pump.

The machine is unable to drain its waste water. On a Hotpoint Washing Machine, code F05 points to the drain pump.

The machine is unable to drain its waste water. On a Indesit Washing Machine, code F05 points to the drain pump.

An over-current condition was detected in the motor drive circuit.

A foreign object or jam was detected between the drum and the pulsator.

Motor overload protection tripped after the drive motor stalled or locked.

Water was not expelled from the tub within the expected drain window.

The washer is not draining properly. On a Maytag Washing Machine, code DRN points to the drain pump.

A motor speed-sensing error was detected. On a Maytag Washing Machine, code F7E1 points to the drive motor.

Draining is taking longer than expected (over about eight minutes). On a Maytag Washing Machine, code F9E1 points to the drain pump.

The machine is having difficulty draining. On a Miele Washing Machine, code F11 points to the drain pump.

A drive-motor fault was detected. On a Samsung Washing Machine, code 3C points to the drive motor.

A drive-motor fault was detected. On a Samsung Washing Machine, code 3C points to the drive motor.

The washer cannot drain the water away. On a Samsung Washing Machine, code 5C points to the drain pump.

Water is not leaving the tub at the expected rate, or at all.

A motor fault was detected. On a Samsung Washing Machine, code EA points to the drive motor.

A clutch-position fault was detected. On a Samsung Washing Machine, code PC points to the clutch.

The washer is not draining properly. On a Whirlpool Washing Machine, code DRN points to the drain pump.

A motor speed-sensing error was detected. On a Whirlpool Washing Machine, code F7E1 points to the drive motor.

Draining is taking longer than expected (over about eight minutes). On a Whirlpool Washing Machine, code F9E1 points to the drain pump.

The pump is blocked (obstructed). On a Bosch Washing Machine, code E0018 points to the drain pump.

The door is not locked properly. On a Bosch Washing Machine, code E34 points to the door lock.

This error code could be caused by a number of issues — please check the following:The water pressure is low. On a Bosch Washing Machine, code E30 points to the drain pump.

This error code could be caused by a number of issues — please check the following:The drain pipe or water outlet hose is blocked. On a Bosch Washing Machine, code E3610 points to the drain pump.

The drain pump is blocked. On a Bosch Washing Machine, code E38 points to the drain pump.