Error E03 Stops machine UK market
Hoover Washing Machine Error Code E03
E03 on a Hoover washing machine usually means: The machine is not draining within the expected time. On a Hoover Washing Machine, code E03 points to the drain pump.
Fix it fast: Clear the drain filter and hose. Full ranked steps below.
- Likely part
- drain pump
- Fault type
- drainage
How to fix E03 — ranked steps
Try these in order. Stop when the code clears.
-
1 Clear the drain filter and hose
Moderate- Unplug the machine, remove debris from the drain filter behind the lower panel, and check the rear drain hose for kinks or blockages, flushing it if needed.
-
2 Service the drain pump
Pro only- If water still will not drain, have the impeller checked for free movement, the motor continuity measured, and the pump assembly replaced if faulty.
Other Hoover Washing Machine codes
E01Stops machine
The door lock (or drum-brake safety device on older collector-motor models) is not engaging correctly.
E02Stops machine
The machine is not filling within the expected time. On a Hoover Washing Machine, code E02 points to the water inlet valve.
E05Degraded
A heating circuit fault in the element or relay was detected.
Search another code
Have a different code? Look it up instantly.