Bosch Washing Machine Error Code E3610
E3610 on a Bosch washing machine usually means: This error code could be caused by a number of issues — please check the following:The drain pipe or water outlet hose is blocked. On a Bosch Washing Machine, code E3610 points to the drain pump.
Fix it fast: Manufacturer troubleshooting steps. Full ranked steps below.
- Likely part
- drain pump
- Fault type
- drainage
How to fix E3610 — ranked steps
Try these in order. Stop when the code clears.
-
1 Manufacturer troubleshooting steps
DIY- Clean the drain pipe and the water outlet hose.
- The drain pipe or water outlet hose is kinked.
- Ensure that the drain pipe and water outlet hose are not kinked.
- The water outlet hose is connected too high.
- Ensure that the water outlet hose is installed at a maximum of 39 in.
- An unsuitable extension is installed on the water outlet hose.
- Remove any unsuitable extensions.
- Drain pump is blocked.
- Clean the drain pump.
- Unsure how to do this?
Other Bosch Washing Machine codes
The pump is blocked (obstructed). On a Bosch Washing Machine, code E0018 points to the drain pump.
This error code could be caused by a number of issues — please check the following:The water pressure is low. On a Bosch Washing Machine, code E30 points to the drain pump.
The drain pump is blocked. On a Bosch Washing Machine, code E38 points to the drain pump.
The door is not locked properly. On a Bosch Washing Machine, code E16 points to the door lock.
The filters in the water connection or AquaStop hose are blocked or the water pressure is too low. On a Bosch Washing Machine, code E17 points to the inlet valve.
The pump for the intelligent dosing system is blocked. On a Bosch Washing Machine, code E10 points to the sensor.
Search another code
Have a different code? Look it up instantly.