Error F05 Stops machine UK market
Hotpoint Washing Machine Error Code F05
F05 on a Hotpoint washing machine usually means: The machine is unable to drain its waste water. On a Hotpoint Washing Machine, code F05 points to the drain pump.
Fix it fast: Clear the pump filter and drain hose. Full ranked steps below.
- Likely part
- drain pump
- Fault type
- drainage
How to fix F05 — ranked steps
Try these in order. Stop when the code clears.
-
1 Clear the pump filter and drain hose
Moderate- Unplug the machine, clear the pump filter and drain hose, and check the pressure-switch tube for blockage - the switch stuck on full is the usual cause.
-
2 Replace the drain pump
Advanced- If the drain path and pressure tube are clear and F05 returns, disconnect power and water and replace the drain pump.
Parts £19.49 –£32.49 Source
Parts that often fix F05
- Washing Machine Drain Pump (C00119307) ~£19.49–£32.49 price
Other Hotpoint Washing Machine codes
F01Stops machine
The electronic control board is not operating correctly. On a Hotpoint Washing Machine, code F01 points to the control board.
F08Stops machine
The heater relay cannot activate or is stuck; heater and pressure-switch connections are implicated. On a Hotpoint Washing Machine, code F08 points to the heating relay.
F16Degraded
A door lock fault was detected on specific models. On a Hotpoint Washing Machine, code F16 points to the door interlock.
Search another code
Have a different code? Look it up instantly.