Error F11 Stops machine UK market
Miele Washing Machine Error Code F11
F11 on a Miele washing machine usually means: The machine is having difficulty draining. On a Miele Washing Machine, code F11 points to the drain pump.
Fix it fast: Clean the drain filter. Full ranked steps below.
- Likely part
- drain pump
- Fault type
- drainage
How to fix F11 — ranked steps
Try these in order. Stop when the code clears.
-
1 Clean the drain filter
Easy- Unplug the machine, open the lower access panel with a tray ready for water, unscrew the drain filter, clear lint and debris, and refit it securely.
-
2 Clear the drain hose
Moderate- Remove kinks and loops from the drain hose, keep its end no higher than about one metre from the floor, and flush the hose through if blocked.
-
3 Service the drain pump
Pro only- If drainage still fails, have the pump impeller checked for debris or damage, the pump tested electrically, and the assembly replaced if defective.
Other Miele Washing Machine codes
F10Stops machine
A water intake fault was detected. On a Miele Washing Machine, code F10 points to the water inlet valve.
F20Degraded
A heating malfunction was detected. On a Miele Washing Machine, code F20 points to the heating element.
F34Stops machine
The door is failing to lock. On a Miele Washing Machine, code F34 points to the door latch.
F53Degraded
A speed sensor (tachometer) fault was detected. On a Miele Washing Machine, code F53 points to the tachometer.
Search another code
Have a different code? Look it up instantly.