Whirlpool Dryer Error Codes
42 codes on file for Whirlpool dryers. Tap a code for the meaning and ranked fix.
| Code | Meaning | Severity |
|---|---|---|
| 0E | Power unit down by turning off the circuit breaker(s) for 5 minutes. On a Whirlpool Dryer, code 0E points to the power supply. | Degraded |
| 0g | Power unit down by turning off the circuit breaker(s) for 5 minutes. On a Whirlpool Dryer, code 0g points to the power supply. | Degraded |
| 3E | Power unit down by turning off the circuit breaker(s) for 5 minutes. On a Whirlpool Dryer, code 3E points to the power supply. | Degraded |
| 6E | Power unit down by turning off the circuit breaker(s) for 5 minutes. On a Whirlpool Dryer, code 6E points to the power supply. | Degraded |
| AF | Restricted airflow. On a Whirlpool Dryer, code AF points to the fan. | Degraded |
| E1 | Power unit down by turning off the circuit breaker(s) for 5 minutes. On a Whirlpool Dryer, code E1 points to the power supply. | Degraded |
| E2 | Power unit down by turning off the circuit breaker(s) for 5 minutes. On a Whirlpool Dryer, code E2 points to the power supply. | Degraded |
| E3 | Power unit down by turning off the circuit breaker(s) for 5 minutes. On a Whirlpool Dryer, code E3 points to the power supply. | Degraded |
| ERR | You will receive the "ERR" error code when the door has not been completely closed and latched; the dryer will not run unless the door is closed. On a Whirlpool Dryer, code ERR points to the door lock. | Degraded |
| F01 | The primary control board failed. On a Whirlpool Dryer, code F01 points to the control board. | Stops machine |
| F1E1 | Power unit down by turning off the circuit breaker(s) for 5 minutes. On a Whirlpool Dryer, code F1E1 points to the power supply. | Degraded |
| F1E3 | An "F1E3" code in the display indicates there may be an issue with the control unit or the associated wiring. On a Whirlpool Dryer, code F1E3 points to the sensor. | Degraded |
| F1E4 | A "F1E4" code in the display indicates there may be an issue with the control unit or the associated wiring. On a Whirlpool Dryer, code F1E4 points to the power supply. | Degraded |
| F1E5 | A "F1E5" code in the display indicates there may be an issue with the control unit or the associated wiring. On a Whirlpool Dryer, code F1E5 points to the sensor. | Degraded |
| F02 | The keypad or user interface failed. On a Whirlpool Dryer, code F02 points to the keypad. | Degraded |
| F2E1 | F2E1 - Keypad Power unit down by turning off the circuit breaker(s) for one (1) minute. On a Whirlpool Dryer, code F2E1 points to the power supply. | Degraded |
| F2E2 | F2E2 - Keypad or Control Power unit down by turning off the circuit breaker(s) for one (1) minute. On a Whirlpool Dryer, code F2E2 points to the power supply. | Degraded |
| F2E4 | An "F2E4" code in the display indicates there may be an issue with the user interface or the associated wiring. On a Whirlpool Dryer, code F2E4 points to the sensor. | Degraded |
| F2E5 | A "F2E5" code in the display indicates there may be an issue with the user interface or the associated wiring. On a Whirlpool Dryer, code F2E5 points to the power supply. | Degraded |
| F3E1 | Exhaust Thermistor Power unit down by turning off the circuit breaker(s) for one (1) minute. On a Whirlpool Dryer, code F3E1 points to the thermistor. | Degraded |
| F3E3 | F3E3 Inlet Thermistor Power unit down by turning off the circuit breaker(s) for one (1) minute. On a Whirlpool Dryer, code F3E3 points to the inlet valve. | Stops machine |
| F3E4 | Power unit down by turning off the circuit breaker(s) for 5 minutes. On a Whirlpool Dryer, code F3E4 points to the power supply. | Degraded |
| F4E1 | There may be a problem with the Heater or Heater Relays. On a Whirlpool Dryer, code F4E1 points to the power supply. | Degraded |
| F4E3 | Restricted airflow. On a Whirlpool Dryer, code F4E3 points to the fan. | Degraded |
| F4E4 | An F4 E4 (Low or No Line Voltage) Diagnostic code indicates that there may be a problem with your home power supply, keeping the dryer's heater from turning on. On a Whirlpool Dryer, code F4E4 points to the power supply. | Degraded |
| F06 | A door lock fault was detected. On a Whirlpool Dryer, code F06 points to the door lock. | Degraded |
| F6E1 | There may be a problem with the Main Control Board, the User Interface (Touchpad), or the associated wiring. On a Whirlpool Dryer, code F6E1 points to the control board. | Degraded |
| F6E2 | Did you receive a F6E2 alert?. On a Whirlpool Dryer, code F6E2 points to the power supply. | Degraded |
| F6E3 | Did you receive an F6E3 alert?. On a Whirlpool Dryer, code F6E3 points to the power supply. | Degraded |
| F7E1 | There may be a problem with the motor, control, or the associated wiring. On a Whirlpool Dryer, code F7E1 points to the drive motor. | Stops machine |
| F9E2 | Power unit down by turning off the circuit breaker(s) for one (1) minute. On a Whirlpool Dryer, code F9E2 points to the power supply. | Degraded |
| F20 | A heating element fault was detected. On a Whirlpool Dryer, code F20 points to the heating element. | Stops machine |
| F24 | A communication fault was detected. On a Whirlpool Dryer, code F24 points to the control board. | Degraded |
| F25 | A communication fault was detected. On a Whirlpool Dryer, code F25 points to the control board. | Degraded |
| F26 | A motor drive fault was detected. On a Whirlpool Dryer, code F26 points to the drive motor. | Stops machine |
| F29 | A moisture sensor fault was detected. On a Whirlpool Dryer, code F29 points to the moisture sensor. | Degraded |
| F30 | Airflow is restricted in the venting system. On a Whirlpool Dryer, code F30 points to the exhaust vent. | Degraded |
| F31 | Low or no line voltage was detected. On a Whirlpool Dryer, code F31 points to the power supply. | Stops machine |
| FCE1 | Power unit down by turning off the circuit breaker(s) for one (1) minute. On a Whirlpool Dryer, code FCE1 points to the power supply. | Degraded |
| L2 | Low or no line voltage. On a Whirlpool Dryer, code L2 points to the power supply. | Degraded |
| Loc | The Loc Error code indicates that the Control Lock has been enabled. On a Whirlpool Dryer, code Loc points to the control panel. | Informational |
| PF | Power failure. On a Whirlpool Dryer, code PF points to the power supply. | Degraded |