Whirlpool Dryer Error Code F30
F30 on a Whirlpool dryer usually means: Airflow is restricted in the venting system. On a Whirlpool Dryer, code F30 points to the exhaust vent.
Fix it fast: Clean the lint screen and restore airflow. Full ranked steps below.
- Likely part
- exhaust vent
- Fault type
- ventilation
How to fix F30 — ranked steps
Try these in order. Stop when the code clears.
-
1 Clean the lint screen and restore airflow
Easy- Unplug the dryer, clean the lint screen, straighten or clear the vent hose and the exterior vent hood, then run briefly and check airflow at the outside vent; if F30 persists, have the full vent run cleaned and the exhaust thermistor tested.
Other Whirlpool Dryer codes
Restricted airflow. On a Whirlpool Dryer, code AF points to the fan.
The primary control board failed. On a Whirlpool Dryer, code F01 points to the control board.
The keypad or user interface failed. On a Whirlpool Dryer, code F02 points to the keypad.
A door lock fault was detected. On a Whirlpool Dryer, code F06 points to the door lock.
A heating element fault was detected. On a Whirlpool Dryer, code F20 points to the heating element.
A communication fault was detected. On a Whirlpool Dryer, code F24 points to the control board.
Search another code
Have a different code? Look it up instantly.