Whirlpool Dryer Error Code L2
L2 on a Whirlpool dryer usually means: Low or no line voltage. On a Whirlpool Dryer, code L2 points to the power supply.
Fix it fast: Manufacturer troubleshooting steps. Full ranked steps below.
- Likely part
- power supply
- Fault type
- power
How to fix L2 — ranked steps
Try these in order. Stop when the code clears.
-
1 Manufacturer troubleshooting steps
DIY- Check if a household fuse has blown or the circuit breaker has tripped. Electric dryers use two household fuses or breakers. Replace the fuse or reset the circuit breaker.
- Confirm that the power cord is properly installed. Refer to the Installation Instructions for details.
- Select a Timed Dry heated cycle and restart the dryer. If the message persists, consult a qualified electrician.
Other Whirlpool Dryer codes
Low or no line voltage was detected. On a Whirlpool Dryer, code F31 points to the power supply.
Power failure. On a Whirlpool Dryer, code PF points to the power supply.
Power unit down by turning off the circuit breaker(s) for 5 minutes. On a Whirlpool Dryer, code E1 points to the power supply.
Power unit down by turning off the circuit breaker(s) for 5 minutes. On a Whirlpool Dryer, code E2 points to the power supply.
Power unit down by turning off the circuit breaker(s) for 5 minutes. On a Whirlpool Dryer, code E3 points to the power supply.
Power unit down by turning off the circuit breaker(s) for 5 minutes. On a Whirlpool Dryer, code F1E1 points to the power supply.
Search another code
Have a different code? Look it up instantly.