Error E02 Stops machine UK market
Hoover Washing Machine Error Code E02
E02 on a Hoover washing machine usually means: The machine is not filling within the expected time. On a Hoover Washing Machine, code E02 points to the water inlet valve.
Fix it fast: Restore the water supply. Full ranked steps below.
- Likely part
- water inlet valve
- Fault type
- water supply
How to fix E02 — ranked steps
Try these in order. Stop when the code clears.
-
1 Restore the water supply
Easy- Confirm the supply is on with sufficient pressure, straighten the fill hose, verify flow into a bucket, and clean the inlet filters.
-
2 Replace the inlet valve
Pro only- If filling still fails, have the inlet valve coil resistance tested and the valve replaced if open-circuit or stuck; check the pressure switch and board inputs next.
Other Hoover Washing Machine codes
E01Stops machine
The door lock (or drum-brake safety device on older collector-motor models) is not engaging correctly.
E03Stops machine
The machine is not draining within the expected time. On a Hoover Washing Machine, code E03 points to the drain pump.
E05Degraded
A heating circuit fault in the element or relay was detected.
Search another code
Have a different code? Look it up instantly.