Dryer Not Drying Clothes (Dryer)

The moisture (humidity) sensor is faulty, extending drying time.

The exhaust vent is roughly eighty percent blocked. On a Samsung Dryer, code C80 points to the exhaust vent.

The exhaust vent is more than ninety percent blocked. On a Samsung Dryer, code C90 points to the exhaust vent.

The exhaust vent is clogged. On a Samsung Dryer, code CLG points to the exhaust vent.

The dryer is overheating. On a Samsung Dryer, code HC points to the heating element.

The load did not dry within the expected time. On a Samsung Dryer, code OD points to the moisture sensor.

The temperature-sensing circuit reported a fault. On a Samsung Dryer, code TS points to the temperature sensor.

Restricted airflow. On a Whirlpool Dryer, code AF points to the fan.

A heating element fault was detected. On a Whirlpool Dryer, code F20 points to the heating element.

A moisture sensor fault was detected. On a Whirlpool Dryer, code F29 points to the moisture sensor.

Airflow is restricted in the venting system. On a Whirlpool Dryer, code F30 points to the exhaust vent.

These reflect an issue with the temperature or with the sensors that measure it. The most common cause is a clogged lint screen or vent system trapping heat in the dryer. On a Samsung Dryer, code t5 points to the fan.

These reflect an issue with the temperature or with the sensors that measure it. The most common cause is a clogged lint screen or vent system trapping heat in the dryer. On a Samsung Dryer, code tC points to the fan.

These reflect an issue with the temperature or with the sensors that measure it. The most common cause is a clogged lint screen or vent system trapping heat in the dryer. On a Samsung Dryer, code tO points to the fan.

These reflect an issue with the temperature or with the sensors that measure it. The most common cause is a clogged lint screen or vent system trapping heat in the dryer. On a Samsung Dryer, code t0 points to the fan.

These reflect an issue with the temperature or with the sensors that measure it. The most common cause is a clogged lint screen or vent system trapping heat in the dryer. On a Samsung Dryer, code tE points to the fan.

These reflect an issue with the temperature or with the sensors that measure it. The most common cause is a clogged lint screen or vent system trapping heat in the dryer. On a Samsung Dryer, code tE3 points to the fan.

These reflect an issue with the temperature or with the sensors that measure it. The most common cause is a clogged lint screen or vent system trapping heat in the dryer. On a Samsung Dryer, code tC5 points to the fan.

These reflect an issue with the temperature or with the sensors that measure it. The most common cause is a clogged lint screen or vent system trapping heat in the dryer. On a Samsung Dryer, code tCS points to the fan.

These reflect an issue with the temperature or with the sensors that measure it. The most common cause is a clogged lint screen or vent system trapping heat in the dryer. On a Samsung Dryer, code 1tC points to the fan.

These reflect an issue with the temperature or with the sensors that measure it. The most common cause is a clogged lint screen or vent system trapping heat in the dryer. On a Samsung Dryer, code 1tC5 points to the fan.

These reflect an issue with the temperature or with the sensors that measure it. The most common cause is a clogged lint screen or vent system trapping heat in the dryer. On a Samsung Dryer, code 1tCS points to the fan.

This code means the dryer's internal components cannot communicate with each other. Shut off the dryer for 60 seconds, and then turn it back on again. On a Samsung Dryer, code Et points to the sensor.

This code means the dryer's internal components cannot communicate with each other. Shut off the dryer for 60 seconds, and then turn it back on again. On a Samsung Dryer, code AE points to the sensor.

This code means the dryer's internal components cannot communicate with each other. Shut off the dryer for 60 seconds, and then turn it back on again. On a Samsung Dryer, code EEE points to the sensor.

This code means the dryer's internal components cannot communicate with each other. Shut off the dryer for 60 seconds, and then turn it back on again. On a Samsung Dryer, code AE4 points to the sensor.

This code means the dryer's internal components cannot communicate with each other. Shut off the dryer for 60 seconds, and then turn it back on again. On a Samsung Dryer, code AE3 points to the sensor.

This code means the dryer's internal components cannot communicate with each other. Shut off the dryer for 60 seconds, and then turn it back on again. On a Samsung Dryer, code AE5 points to the sensor.

This code means the dryer's internal components cannot communicate with each other. Shut off the dryer for 60 seconds, and then turn it back on again. On a Samsung Dryer, code E3 points to the sensor.

This code means the dryer's internal components cannot communicate with each other. Shut off the dryer for 60 seconds, and then turn it back on again. On a Samsung Dryer, code 1AC points to the sensor.