Samsung Dishwasher Error Code HE
HE on a Samsung dishwasher usually means: The heater temperature-detection circuit is faulty. On a Samsung Dishwasher, code HE points to the temperature sensor.
Fix it fast: Rerun and reset. Full ranked steps below.
- Likely part
- temperature sensor
- Fault type
- heating
How to fix HE — ranked steps
Try these in order. Stop when the code clears.
-
1 Rerun and reset
Moderate- Empty the unit, add detergent and run a normal cycle; if it persists, power off at the breaker and contact support.
Other Samsung Dishwasher codes
The water overheated beyond the safe limit. On a Samsung Dishwasher, code HC points to the heating element.
A drain-pump operation fault was detected. On a Samsung Dishwasher, code 3C points to the drain pump.
The water supply is inadequate in pressure or temperature. On a Samsung Dishwasher, code 4C points to the water inlet valve.
The dishwasher cannot drain. On a Samsung Dishwasher, code 5C points to the drain pump.
The water level inside the tub is too low. On a Samsung Dishwasher, code 9E points to the water level sensor.
A panel button is being sensed as stuck. On a Samsung Dishwasher, code BE points to the control panel.
Search another code
Have a different code? Look it up instantly.