Samsung Dishwasher Error Code BE
BE on a Samsung dishwasher usually means: A panel button is being sensed as stuck. On a Samsung Dishwasher, code BE points to the control panel.
Fix it fast: Free the stuck button. Full ranked steps below.
- Likely part
- control panel
- Fault type
- control board
How to fix BE — ranked steps
Try these in order. Stop when the code clears.
-
1 Free the stuck button
Easy- Turn the dishwasher off and press each panel button once; if a button stays stuck or the error returns, contact support.
Other Samsung Dishwasher codes
A drain-pump operation fault was detected. On a Samsung Dishwasher, code 3C points to the drain pump.
The water supply is inadequate in pressure or temperature. On a Samsung Dishwasher, code 4C points to the water inlet valve.
The dishwasher cannot drain. On a Samsung Dishwasher, code 5C points to the drain pump.
The water level inside the tub is too low. On a Samsung Dishwasher, code 9E points to the water level sensor.
The water overheated beyond the safe limit. On a Samsung Dishwasher, code HC points to the heating element.
The heater temperature-detection circuit is faulty. On a Samsung Dishwasher, code HE points to the temperature sensor.
Search another code
Have a different code? Look it up instantly.