Samsung Dishwasher Error Code 5C
5C on a Samsung dishwasher usually means: The dishwasher cannot drain. On a Samsung Dishwasher, code 5C points to the drain pump.
Fix it fast: Clear the drain. Full ranked steps below.
- Likely part
- drain pump
- Fault type
- drainage
How to fix 5C — ranked steps
Try these in order. Stop when the code clears.
-
1 Clear the drain
Easy- Clear the filter and drain hose of any blockage, then restart the cycle.
-
2 Replace the drain pump
Advanced- If the filter and hose are clear and the drain error returns, disconnect power and water and replace the drain pump assembly.
Parts $217.95 Source
Parts that often fix 5C
- Dishwasher Drain Pump Assembly (DD81-02635A) ~$217.95 price
Other Samsung Dishwasher codes
A drain-pump operation fault was detected. On a Samsung Dishwasher, code 3C points to the drain pump.
The water supply is inadequate in pressure or temperature. On a Samsung Dishwasher, code 4C points to the water inlet valve.
The water level inside the tub is too low. On a Samsung Dishwasher, code 9E points to the water level sensor.
A panel button is being sensed as stuck. On a Samsung Dishwasher, code BE points to the control panel.
The water overheated beyond the safe limit. On a Samsung Dishwasher, code HC points to the heating element.
The heater temperature-detection circuit is faulty. On a Samsung Dishwasher, code HE points to the temperature sensor.
Search another code
Have a different code? Look it up instantly.