FixDecode
Error FF Stops machine US market

LG Washing Machine Error Code FF

FF on a LG washing machine usually means: The FF error stands for Freeze Failure. On a LG Washing Machine, code FF points to the drain pump.

Fix it fast: Manufacturer troubleshooting steps. Full ranked steps below.

Likely part
drain pump
Fault type
drainage
Manufacturer source Updated Oct 17, 2026 View source

How to fix FF — ranked steps

Try these in order. Stop when the code clears.

  1. 1 Manufacturer troubleshooting steps

    DIY
    • ① Open the washer door and remove all laundry.
    • ② Pour warm water (50-60ºC) into the drum, close the door and wait 1 to 2 hours for the drain pump to thaw.
    • ③ Open the access cover on the lower side of the washer. Remove the cap from the drain tube, drain any water and securely close the cap. If no water comes out, ice may not have fully melted so please wait a little longer and try again.
    • ④ Turn on the washer and perform a [Rinse x1] cycle to check it operates without issues.
    • ⑤ If the error code [IE] (Water Inlet Error) appears on the display and the drum does not fill, follow the below steps to thaw the inlet hose.
    • ① Separate the inlet hoses from the washer. Open the taps to test if water flows from the taps.
    • ② If there is no water from the taps, wet a cloth with hot water and leave it wrapped around the taps for five minutes.
    • ③Thaw the inlet hoses in warm water (below 50ºC). Once they have thawed, connect them to the washer again.
    Source

Other LG Washing Machine codes

OEStops machine

Water was not expelled from the tub within the expected drain window.

E03Stops machine

An OE/E03/E21 error code indicates the washing machine is unable to drain the water used during the wash cycle. On a LG Washing Machine, code E03 points to the drain pump.

E21Stops machine

An OE/E03/E21 error code indicates the washing machine is unable to drain the water used during the wash cycle. On a LG Washing Machine, code E21 points to the drain pump.

u51Stops machine

The FF error stands for Freeze Failure. On a LG Washing Machine, code u51 points to the drain pump.

E3Stops machine

To resolve the E3 error, unplug the power cord, reconnect it and attempt to operate the washer again. On a LG Washing Machine, code E3 points to the drain pump.

CEStops machine

An over-current condition was detected in the motor drive circuit.

Search another code

Have a different code? Look it up instantly.

Open code lookup →