JennAir Microwave Error Codes
17 codes on file for JennAir microwaves. Tap a code for the meaning and ranked fix.
| Code | Meaning | Severity |
|---|---|---|
| E03 | The Keypad (User Interface) reported a problem to the control board. On a JennAir Microwave, code E03 points to the control board. | Degraded |
| E11 | The Gas Sensor reported a problem to the control board. On a JennAir Microwave, code E11 points to the control board. | Degraded |
| E12 | There is a problem with the Gas Sensor or the associated wiring. On a JennAir Microwave, code E12 points to the power supply. | Degraded |
| E13 | The oven did not pre-heat correctly. On a JennAir Microwave, code E13 points to the power supply. | Degraded |
| E21 | The Thermal Sensor circuit reported open to the control board. On a JennAir Microwave, code E21 points to the control board. | Degraded |
| E22 | The Thermal Sensor circuit reported a short to the control board. On a JennAir Microwave, code E22 points to the control board. | Degraded |
| E23 | The oven did not reach Pre-Heat Temperature within 30 (thirty) minutes. On a JennAir Microwave, code E23 points to the power supply. | Degraded |
| E24 | The oven reached an overheat condition of 500F (260C). On a JennAir Microwave, code E24 points to the power supply. | Degraded |
| E61 | The oven sensor circuit reported an open condition to the control board. On a JennAir Microwave, code E61 points to the control board. | Degraded |
| E62 | The Oven Sensor circuit reported a shorted condition to the control board. On a JennAir Microwave, code E62 points to the control board. | Degraded |
| E63 | The Oven Sensor circuit reported a shorted condition to the control board. On a JennAir Microwave, code E63 points to the control board. | Degraded |
| FCE1 | The appliance could not connect to the router. On a JennAir Microwave, code FCE1 points to the control board. | Degraded |
| FCE2 | The appliance could not connect to the router. On a JennAir Microwave, code FCE2 points to the control board. | Degraded |
| FCE3 | The appliance could not connect to the router. On a JennAir Microwave, code FCE3 points to the control board. | Degraded |
| FCE7 | There is no link between the Wi-Fi Module and the internet. On a JennAir Microwave, code FCE7 points to the power supply. | Degraded |
| FCE8 | If the SAID number was entered incorrectly, the "Registration Error" will appear. On a JennAir Microwave, code FCE8 points to the sensor. | Degraded |
| SE | There is a problem with the Keypad (User Interface) or the associated wiring. On a JennAir Microwave, code SE points to the power supply. | Degraded |