Frigidaire Washing Machine Error Code E11
E11 on a Frigidaire washing machine usually means: The fill time is too long. On a Frigidaire Washing Machine, code E11 points to the water inlet valve.
Fix it fast: Restore the incoming water flow. Full ranked steps below.
- Likely part
- water inlet valve
- Fault type
- water supply
How to fix E11 — ranked steps
Try these in order. Stop when the code clears.
-
1 Restore the incoming water flow
Easy- Open both supply valves fully, straighten kinked inlet hoses, clean the inlet screens, verify household pressure, then power-cycle for one minute and retry.
-
2 Replace the inlet valve
Advanced- If fills stay slow, replace the water inlet valve assembly and check the pressure switch and its hose.
Other Frigidaire Washing Machine codes
Water is not entering washer or slow water fill time. On a Frigidaire Washing Machine, code E1 points to the inlet valve.
Water is not pumping out fast enough. On a Frigidaire Washing Machine, code E21 points to the drain pump.
Water takes too long to drain or is not draining properly. On a Frigidaire Washing Machine, code E2 points to the drain pump.
Wash lid is either open or the lid lock failed. On a Frigidaire Washing Machine, code E3 points to the sensor.
The unit is out of balance during spin operation. On a Frigidaire Washing Machine, code E4 points to the sensor.
The unit is not level. On a Frigidaire Washing Machine, code E5 points to the vibration sensor.
Search another code
Have a different code? Look it up instantly.