Frigidaire Washing Machine Error Code E1
E1 on a Frigidaire washing machine usually means: Water is not entering washer or slow water fill time. On a Frigidaire Washing Machine, code E1 points to the inlet valve.
Fix it fast: Manufacturer troubleshooting steps. Full ranked steps below.
- Likely part
- inlet valve
- Fault type
- water supply
How to fix E1 — ranked steps
Try these in order. Stop when the code clears.
-
1 Manufacturer troubleshooting steps
DIY- Check if the lid is open.
- Fully open hot and cold faucets.
- Check water supply pressure is sufficient.
- Straighten inlet hoses if kinked.
- Hose filter screens may be clogged. Disconnect hoses and clean the screens.
- Check for water leakage from the tub.
Other Frigidaire Washing Machine codes
The fill time is too long. On a Frigidaire Washing Machine, code E11 points to the water inlet valve.
Water is not pumping out fast enough. On a Frigidaire Washing Machine, code E21 points to the drain pump.
Water takes too long to drain or is not draining properly. On a Frigidaire Washing Machine, code E2 points to the drain pump.
Wash lid is either open or the lid lock failed. On a Frigidaire Washing Machine, code E3 points to the sensor.
The unit is out of balance during spin operation. On a Frigidaire Washing Machine, code E4 points to the sensor.
The unit is not level. On a Frigidaire Washing Machine, code E5 points to the vibration sensor.
Search another code
Have a different code? Look it up instantly.