Bosch Washing Machine Error Code H32
H32 on a Bosch washing machine usually means: The laundry is unevenly distributed. On a Bosch Washing Machine, code H32 points to the drive motor.
Fix it fast: Manufacturer troubleshooting steps. Full ranked steps below.
- Likely part
- drive motor
- Fault type
- motor
How to fix H32 — ranked steps
Try these in order. Stop when the code clears.
-
1 Manufacturer troubleshooting steps
DIY- This has triggered the unbalanced load detection system and interrupted the spin cycle.
- Redistribute the laundry in the drum.
- When possible, mix large and small items in the drum.
- Items of different size distribute themselves better during the spin cycle.
Other Bosch Washing Machine codes
The door is not locked properly. On a Bosch Washing Machine, code E16 points to the door lock.
The filters in the water connection or AquaStop hose are blocked or the water pressure is too low. On a Bosch Washing Machine, code E17 points to the inlet valve.
The pump is blocked (obstructed). On a Bosch Washing Machine, code E0018 points to the drain pump.
The pump for the intelligent dosing system is blocked. On a Bosch Washing Machine, code E10 points to the sensor.
The door is not locked properly. On a Bosch Washing Machine, code E34 points to the door lock.
This error code could be caused by a number of issues — please check the following:The water pressure is low. On a Bosch Washing Machine, code E30 points to the drain pump.
Search another code
Have a different code? Look it up instantly.