Samsung Washing Machine Error Code 4C
4C on a Samsung washing machine usually means: The washer is not receiving water correctly during fill. On a Samsung Washing Machine, code 4C points to the water inlet valve.
Fix it fast: Restore the water supply. Full ranked steps below.
- Likely part
- water inlet valve
- Fault type
- water supply
How to fix 4C — ranked steps
Try these in order. Stop when the code clears.
-
1 Restore the water supply
Easy- Open the tap fully, confirm supply pressure is within 0.5 to 8 bar, clean the mesh filter, and check the hose for kinks.
Other Samsung Washing Machine codes
A low water level was detected during operation. On a Samsung Washing Machine, code 11E points to the water level sensor.
The incoming water is running hot, indicating a hot-tap connection.
The cold supply line is running unexpectedly hot, indicating reversed hoses.
The water level rose above the permitted maximum. On a Samsung Washing Machine, code OC points to the water level sensor.
Water Temperature Errors: The water being supplied to the washer is the wrong temperature, or extremely hot. Make sure the supply hoses are attached correctly - red to the hot tap and blue to the cold tap. On a Samsung Washing Machine, code nF1 points to the inlet valve.
Water Temperature Errors: The water being supplied to the washer is the wrong temperature, or extremely hot. Make sure the supply hoses are attached correctly - red to the hot tap and blue to the cold tap. On a Samsung Washing Machine, code 4E1 points to the inlet valve.
Search another code
Have a different code? Look it up instantly.