Samsung Dryer Error Code 6C2
6C2 on a Samsung dryer usually means: This appears if a button on the panel is detected as stuck or continuously pressed. If you get this error, power off the dryer, and then individually touch and release every button on the panel, working back and forth to reach all edges of each button. On a Samsung Dryer, code 6C2 points to the drive motor.
Fix it fast: Manufacturer troubleshooting steps. Full ranked steps below.
- Likely part
- drive motor
- Fault type
- motor
How to fix 6C2 — ranked steps
Try these in order. Stop when the code clears.
-
1 Manufacturer troubleshooting steps
DIY- This appears if a button on the panel is detected as stuck or continuously pressed.
- If you get this error, power off the dryer, and then individually touch and release every button on the panel, working back and forth to reach all edges of each button.
- If any of the buttons are damaged, or the code returns after powering on the dryer, visit our Support Center to request service.
- Read more Read less
Other Samsung Dryer codes
A drive-motor fault was detected. On a Samsung Dryer, code 3C points to the drive motor.
This appears if a button on the panel is detected as stuck or continuously pressed. If you get this error, power off the dryer, and then individually touch and release every button on the panel, working back and forth to reach all edges of each button. On a Samsung Dryer, code bE2 points to the drive motor.
This appears if a button on the panel is detected as stuck or continuously pressed. If you get this error, power off the dryer, and then individually touch and release every button on the panel, working back and forth to reach all edges of each button. On a Samsung Dryer, code bC2 points to the drive motor.
This appears if a button on the panel is detected as stuck or continuously pressed. If you get this error, power off the dryer, and then individually touch and release every button on the panel, working back and forth to reach all edges of each button. On a Samsung Dryer, code 6E points to the drive motor.
This appears if a button on the panel is detected as stuck or continuously pressed. If you get this error, power off the dryer, and then individually touch and release every button on the panel, working back and forth to reach all edges of each button. On a Samsung Dryer, code 6E2 points to the drive motor.
These codes will only appear after a Vent Blockage test has been run. Clg, Cg: The vent is clogged. On a Samsung Dryer, code Cl9 points to the drive motor.
Search another code
Have a different code? Look it up instantly.