LG Dryer Error Code NP
NP on a LG dryer usually means: No current is being sensed at the heater, usually a home wiring or supply issue.
Fix it fast: Verify the power connection. Full ranked steps below.
- Likely part
- heater circuit
- Fault type
- power
How to fix NP — ranked steps
Try these in order. Stop when the code clears.
-
1 Verify the power connection
Moderate- Confirm the cord is secure in a grounded 240V outlet matching the rating plate, reset the breaker for ten seconds, and have an electrician verify the voltage if the code persists.
Other LG Dryer codes
Power to the dryer was interrupted and a reset is required. On a LG Dryer, code PF points to the control board.
Improper voltage at the power cord, typically from reversed terminal wiring.
Airflow through the exhaust duct is restricted by roughly eighty percent.
Airflow through the exhaust duct is restricted by roughly ninety percent.
The door is not fully closed or is obstructed. On a LG Dryer, code DE points to the door.
A water-supply problem affected the steam cycle. On a LG Dryer, code E05 points to the water inlet valve.
Search another code
Have a different code? Look it up instantly.