KitchenAid Microwave Error Code SE
SE on a KitchenAid microwave usually means: There is a problem with the Keypad (User Interface) or the associated wiring. On a KitchenAid Microwave, code SE points to the power supply.
Fix it fast: Manufacturer troubleshooting steps. Full ranked steps below.
- Likely part
- power supply
- Fault type
- power
How to fix SE — ranked steps
Try these in order. Stop when the code clears.
-
1 Manufacturer troubleshooting steps
DIY- Power unit down by turning off the circuit breaker(s) for one (1) minute.
- Power unit up by turning on the circuit breaker(s).
- Monitor the microwave oven for one (1) minute to ensure the error code does not display again.
- Verify microwave oven operation.
Frequently asked questions
What does KitchenAid Microwave error SE mean?
There is a problem with the Keypad (User Interface) or the associated wiring. On a KitchenAid Microwave, code SE points to the power supply.
Which part is usually at fault for KitchenAid error SE?
The most commonly implicated component is the power supply.
What is the first thing to try for KitchenAid error SE?
Power unit down by turning off the circuit breaker(s) for one (1) minute. Power unit up by turning on the circuit breaker(s). Monitor the microwave oven for one (1) minute to ensure the error code does not display again. Verify microwave oven operation.
Other KitchenAid Microwave codes
There is no link between the Wi-Fi Module and the internet. On a KitchenAid Microwave, code FCE7 points to the power supply.
There is a problem with the Gas Sensor or the associated wiring. On a KitchenAid Microwave, code E12 points to the power supply.
The oven did not pre-heat correctly. On a KitchenAid Microwave, code E13 points to the power supply.
The oven did not reach Pre-Heat Temperature within 30 (thirty) minutes. On a KitchenAid Microwave, code E23 points to the power supply.
The oven reached an overheat condition of 500F (260C). On a KitchenAid Microwave, code E24 points to the power supply.
The appliance could not connect to the router. On a KitchenAid Microwave, code FCE1 points to the control board.
Search another code
Have a different code? Look it up instantly.