KitchenAid Dishwasher Error Code H20
H20 on a KitchenAid dishwasher usually means: Not Detecting Water. On a KitchenAid Dishwasher, code H20 points to the inlet valve.
Fix it fast: Manufacturer troubleshooting steps. Full ranked steps below.
- Likely part
- inlet valve
- Fault type
- water supply
How to fix H20 — ranked steps
Try these in order. Stop when the code clears.
-
1 Manufacturer troubleshooting steps
DIY- Ensure water supply is turned on to the dishwasher.
- Check to make sure there are no kinks in the water supply hose.
Frequently asked questions
What does KitchenAid Dishwasher error H20 mean?
Not Detecting Water. On a KitchenAid Dishwasher, code H20 points to the inlet valve.
Which part is usually at fault for KitchenAid error H20?
The most commonly implicated component is the inlet valve.
What is the first thing to try for KitchenAid error H20?
Ensure water supply is turned on to the dishwasher. Check to make sure there are no kinks in the water supply hose.
Problems linked to error H20
Other KitchenAid Dishwasher codes
Water Detected in Drip Tray. On a KitchenAid Dishwasher, code F8E4 points to the leak sensor.
Wash Motor Error. On a KitchenAid Dishwasher, code F7E2 points to the drive motor.
Long Drain - Not Draining. On a KitchenAid Dishwasher, code F9E1 points to the drain pump.
User Interface Error, Main Control. On a KitchenAid Dishwasher, code F6E1 points to the sensor.
Search another code
Have a different code? Look it up instantly.