Which part is usually at fault for Frigidaire error DI?

The most commonly implicated component is the drive motor.

What is the first thing to try for Frigidaire error DI?

Indicates there is ice jammed in the shoot. An alarm will sound when a cube is stuck in the shoot too long. Ice has melted and frozen around the auger due to infrequent use, temperature fluctuations, and/or power outages. Ice cubes are jammed between the ice maker and the back of the ice bin Remove the ice bin, thaw, and empty the contents. Clean the container, wipe dry, and replace it in the proper position. When new ice is made, the dispenser should operate. Remove ice cubes jamming the dispenser. Depending on upon which model your unit is, you may try one of the following: Pressing "“CLEAR ALERTS" button on the unit. Reset the unit by unplugging the unit for 30 seconds and plugging it back in. If you are unable to unplug the unit, you can try flipping the breaker at the fuse box, please note that this will reset everything on same circuit. For more information please refer to your use and care guide.

Error DI Stops machine US market

Frigidaire Refrigerator Error Code DI

DI on a Frigidaire refrigerator usually means: Ice Jam. On a Frigidaire Refrigerator, code DI points to the drive motor.

Fix it fast: Manufacturer troubleshooting steps. Full ranked steps below.

Likely part: drive motor
Fault type: motor

Manufacturer source Updated Oct 17, 2026 View source

How to fix DI — ranked steps

Try these in order. Stop when the code clears.

1 Manufacturer troubleshooting steps
DIY
- Indicates there is ice jammed in the shoot. An alarm will sound when a cube is stuck in the shoot too long.
- Ice has melted and frozen around the auger due to infrequent use, temperature fluctuations, and/or power outages.
- Ice cubes are jammed between the ice maker and the back of the ice bin
- Remove the ice bin, thaw, and empty the contents. Clean the container, wipe dry, and replace it in the proper position. When new ice is made, the dispenser should operate.
- Remove ice cubes jamming the dispenser.
- Depending on upon which model your unit is, you may try one of the following:
- Pressing "“CLEAR ALERTS" button on the unit.
- Reset the unit by unplugging the unit for 30 seconds and plugging it back in.
- If you are unable to unplug the unit, you can try flipping the breaker at the fuse box, please note that this will reset everything on same circuit.
- For more information please refer to your use and care guide.
Source