Candy Washing Machine Error Code E16
E16 on a Candy washing machine usually means: A heating element or inverter-board fault was detected. On a Candy Washing Machine, code E16 points to the heating element.
Fix it fast: Reset and retest. Full ranked steps below.
- Likely part
- heating element
- Fault type
- heating
How to fix E16 — ranked steps
Try these in order. Stop when the code clears.
-
1 Reset and retest
Easy- Unplug for a few minutes, reconnect, close the door fully, and run a short test wash.
-
2 Service the heating circuit
Pro only- Have the heater resistance measured and the NTC sensor tested, replacing whichever is open, shorted, or out of range, and inspect the connectors.
Other Candy Washing Machine codes
The machine is not detecting the door as closed and locked. On a Candy Washing Machine, code E01 points to the door interlock.
The machine is not filling within the expected time. On a Candy Washing Machine, code E02 points to the water inlet valve.
The machine cannot drain within the expected time. On a Candy Washing Machine, code E03 points to the drain pump.
The motor speed sensor is not reading drum speed correctly. On a Candy Washing Machine, code E08 points to the tachogenerator.
Search another code
Have a different code? Look it up instantly.