FixDecode
Error E200 Stops machine US market

Bosch Dishwasher Error Code E200

E200 on a Bosch dishwasher usually means: There is an issue with water flow into the dishwasher. On a Bosch Dishwasher, code E200 points to the inlet valve.

Fix it fast: Manufacturer troubleshooting steps. Full ranked steps below.

Likely part
inlet valve
Fault type
water supply
Manufacturer source Updated Oct 17, 2026 View source

How to fix E200 — ranked steps

Try these in order. Stop when the code clears.

  1. 1 Manufacturer troubleshooting steps

    DIY
    • The water level is too low, or water is not being pumped correctly.
    • Check the inlet hose and make sure it isn't kinked or damaged.
    • Make sure the water supply is turned on.
    • The water flow rate should be 10 l/min.
    Source

Other Bosch Dishwasher codes

E17Stops machine

There is an issue with water flowing into the dishwasher or the filling system. On a Bosch Dishwasher, code E17 points to the inlet valve.

E18Stops machine

There is an issue with water flow into the dishwasher. On a Bosch Dishwasher, code E18 points to the inlet valve.

E16Stops machine

There is an issue with water flowing into the dishwasher or the filling system. On a Bosch Dishwasher, code E16 points to the inlet valve.

E3300Stops machine

There is an issue with water flowing into the dishwasher or the filling system. On a Bosch Dishwasher, code E3300 points to the inlet valve.

E3400Stops machine

There is an issue with water flowing into the dishwasher or the filling system. On a Bosch Dishwasher, code E3400 points to the inlet valve.

E01Stops machine

There is a heat pump motor circuit fault at the main control board. On a Bosch Dishwasher, code E01 points to the drive motor.

Search another code

Have a different code? Look it up instantly.

Open code lookup →